Thursday, November 19, 2009
Fiat Panda Cross is based on the ready made version of the Panda 4x4
Fiat Panda Cross is based on the ready made version of the Panda 4x4, walking on the road. It is available with a diesel engine 1.3 'Multijet "69 hp.
Fiat Panda Cross The vehicle is better suited for the Panda 4x4 driving on the roads, the transport with the role that Fiat is the name of "locking differential and body with the elements, protecting them from bumps and low friction.
The more similar and Subaru Justy Suzuki Ignis, but with permanent traction, are only with petrol engines of 99 horses.
Under normal conditions, liability, Fiat Panda Cross is practically front-wheel drive. Between the front and rear axles, the viscous slip differential, the two axes allow for greater solidarity to the front wheels.
Fiat Panda Cross activation 'Differential Lock"the switch on the dashboard, you can completely stop the spinning-wheel ABS, which draw more power in the next round are the same axis.
It is functionally similar to slip differential and is up to 30 km / h, from this speed. Is not that limiting.
Fiat Panda Cross Angles characteristic for driving on steep areas are good: the attack and ventral 24 °, 42 ° east. Ground clearance (with the protection of the motor) is 165 mm. Use the measuring wheels 175/65 R15, which have a slightly larger diameter with Panda 4x4
Protect the body from impact or small steps presented, Fiat, several pieces of plastic on the sides (for the wheel arches and the lower half of the door) and shield (the plastic painted silver) appears in the central part of the lower bumper.
Some auxiliary lights in front of the long distance covered with the plastic frame the same color as the sides covered. Behind them to the pilots and are as described above, are protected by another plastic.
Also, there are no new developments in equipment. You can use the same elements as the rest have the Panda range: address two levels of support, air conditioning, panoramic roof, or browser. The device is new.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment