BMW builds a lightweight M3 GTS with four doors—and all of its color on the inside.
We first told you about BMW’s upcoming lightweight M3 sedan when it debuted as a concept car in April, following that up with a series of spy photos in May. Well, June is nearing its end, and we’d feel just horrible if we missed a monthly installment, so today we’re on to the thrilling conclusion in this three-part series. (At least until the surprise follow-up, when we drive the thing.)In the lead-up to the Nürburgring 24 Hours race, BMW used its “M Night” celebration to debut the production version of this supersedan, officially called the BMW M3 CRT Lightweight Sedan, CRT standing for Carbon Racing Technologies. Unless you think every sports car needs a roll cage, which appeared on the M3 GTS coupe, the CRT won’t disappoint. (BMW has released video of the car; you can watch it here.)
Carbon Fiber, Now With More Rigidity
This car isn’t called the M3 CRT Big Horsepower though, so let’s get to the things that make it lighter than a standard M3 sedan. Benefitting from new manufacturing processes developed for the carbon-intensive BMW i3 and i8 models coming in 2013, the M3 CRT has a hood that consists of two carbon-fiber sheets encasing an aramid composite honeycomb for added rigidity. As a result, it has the strength of a traditional steel hood with just a quarter of the weight. Compared to a normal M3’s aluminum piece, the weight is halved. Inside the cabin, the front bucket seats use the same process and therefore benefit from the same weight savings. The result is a car that weighs just 3483 pounds despite standard equipment that includes a dual-clutch transmission, navigation, a high-end BMW Individual audio system, and parking sensors. BMW says that, while the official weight savings is 100 pounds, if all this equipment is considered, the real savings is over 150 pounds. And considered alongside the car’s added horsepower, the cuts are good for a ratio of 7.7 pounds for each pony to carry, an improvement of roughly one full pound over the regular M3 sedan.
Freeze Frame
Up until now, we’ve seen the car running around the Nürburgring in dark blue paint, but for its official debut, it now wears frozen (BMW’s word for matte) silver metallic paint with brick-red accents on the grille kidneys, spoilers, and side vents. Inside, the red theme continues, thankfully toned down by numerous swatches of black leather and aluminum trim, both in a carbon-fiber-weave pattern. Each car gets a numbered plaque and the most heavily bolstered rear seats we’ve seen since the old Mercedes-Benz 190E 2.3-16V. It almost looks as if the outboard seats were scooped out and red leather was glued in the holes.
You’ve probably been reading all of this knowing that there has to be some disappointing news somewhere. Here it is: The M3 CRT is limited to just 67 units, and not a single one will make it to the United States. According to BMW USA, items like those revolutionary front seats, which lack airbags, wouldn’t fly here. Because of the extremely low production volume, it’s simply easier to leave our market out of the mix than to give it special treatment. We’d try to be more upset, but let’s be honest: We all saw it coming.
Source : Caranddriver.com
No comments:
Post a Comment